Race car parts, top quality manufactured aluminum fabrication, sold by authorized dealers

OUR PRODUCTS (1) (2)

part# 04030 Dry Sump Oil with Swirl

part 04031 Dry Sump oil Tank with Swirl and Vent, Short Bol.t

part# 04032 Dry Somp Oil Tank with Swirl and Vent, Long Bolt

part# 04002 Dry Sump Oil Hander part# 04003 Dry Sump Oil Tank Dirt Late Model (not shown)

part# 09003 All Aluminum Quick Drain Pan, Vinyl Trim on Handle.................................. part# 09001 Aluminum Catch Can w/o Probe part# 09002 Aluminum Catch Can With Probe

part# 01501 3" Power Steering Tank , Non-Vented Lid. Economy Mount

part# 01001 3" Power Steering Tank, Non-Vented Lid, Aluminum Mount that will fit any Diameter Bar..................... Part# 01004 same as above , w/T-Baffle

part# 03001 Filler tank, Billet Neck, Two 1/4" Female Pipe. Fitting for Bleed Line and One 1/2" Female Pipe fitting for Fill Line.Roll Bar type mount.

part# 03002 Filler Tank, 3" diameter w/Billet Neck. One 1/4" Female Pipe Fitting and Bleed line and One 1/2" Female Pipe Fitting for Fill Line. Adjustable Roll Bar Mount.

part# 01500 3" Power Steering Tank Only..(No Lid & No Mount)

part# 02010 Quick Change filler Tank w/Combo Vent, -10 to fill Rear End, 3/8" NPT to Vent Rear End and 3/8" NPT to vent Fuel cell. ... part# 02010-45 same as above with 45

part# 01102 Firewall mount Power Steering Reservoir, Non-Vented, Internal Baffle, -6 fitting, Right Side

part# 01202 Firewall mount Power Steering Reservoir, Non-Vented, Internal Baffle, -6 fitting, Left Side

part# 01000 Delux Mount

part# 00500 Economy Mount

part# 05001Flapper valve 1" part# 05021-1/4" Valve w/o Spring part# 05003 1-1/4" Value with Spring.

No Picture

part# 02001 Dray Sump/Rear End Breather Tank Combo, inckudes Baffle and Panel Mount. (One ea.1/2" & 3/8" Female Pipe Fitting @ 180 Degree from each other and One 3/8" Female Pipe Fitting at bottom of Tank- includes PetCock and Element)

part# 03004 Cooling System check Valve with One-20 Male Fitting on each end. No Neck ....................... part# 03005 Cooling System check Valve with Two-20 Male fitting.

.part# 03003 Expansion Tank. Approx. 1- 1/2 Quart. One Female Pipe Fittting w/RollBar-No Neck.

More Products

Hicks Specialty Welding and Fabricating

Created by: Worldnetimage